Even in the ELD era, you need to be able to read a paper-style duty-status graph — it appears on every ELD display, on roadside printouts, and on written-test questions.
Standard day example
0000-0600 Off Duty (6.0 hrs)
0600-0630 On-Duty (pre-trip) (0.5 hr)
0630-1030 Driving (4.0 hrs)
1030-1100 On-Duty (fuel) (0.5 hr)
1100-1130 Off Duty (meal) (0.5 hr)
1130-1500 Driving (3.5 hrs)
1500-1530 On-Duty (unload) (0.5 hr)
1530-2400 Off Duty (8.5 hrs)
Total: 24.0 hrs
Driving: 7.5 On-Duty non-driving: 1.5 Total on-duty: 9.0
Split sleeper berth example
An 8/2 split: 8 consecutive hours in the sleeper berth, then later at least 2 consecutive hours off duty or sleeper. Neither period counts against the 14-hour window. Combined, they give you a full rest reset. See our sleeper berth guide for the mechanics.
What examiners check
- Totals add to exactly 24.
- No overlapping status lines.
- Location entered for each duty change.
- Signature at the bottom.
Key facts to remember about Logbook Examples: Reading and Filling Duty Status
The material on this page is drawn from the FMCSA CDL Manual and, where a state rule differs, from the relevant state DMV manual. That is the same regulatory language your examiner will grade your written test against. When you sit for the CDL exam, questions on Logbook Examples: Reading and Filling Duty Status are not usually trick questions — they test whether you have internalized the specific numbers, definitions, and procedures above and can apply them under time pressure.
Two habits separate drivers who pass this section on the first try from those who have to retake it. The first is treating the quick-answer box at the top of this guide as a fact you have to be able to write out from memory — not just recognize when you see it. The second is reading the common-mistakes list with the assumption that at least one of those wrong patterns is going to show up as a distractor on your exam. Both habits take five minutes per guide and dramatically reduce the number of questions you flag as "not sure" on test day.
How Logbook Examples: Reading and Filling Duty Status fits the rest of your CDL study plan
This is one guide inside a Hours of Service topic pack on CDLTest360. The full topic covers every subject the FMCSA CDL Manual expects a commercial driver to know before taking the written exam. After you have worked through this page, the fastest way to lock in the material is to take a short practice test that draws from the same question pool your state DMV uses. Missed questions link back to the guide that answers them, so weak spots surface themselves — no guessing about what to re-read.
If any acronym or part name on this page is unfamiliar, every one of them is defined in the CDL glossary. Terms are auto-linked on first mention, so you can jump to a definition and come right back without losing your place. And if you are studying for a state-specific rule that is not identical to the federal regulation, always let your state CDL manual take precedence — this site is built on FMCSA material, and a handful of numbers (medical certification windows, permit-holding periods, endorsement fees) do vary by state.
Ready to test yourself?
Once you feel like you own this page, take a practice test on Hours of Service to prove it. Aim for a strong pass rate before moving on. If you are preparing for the full CDL exam, browse the rest of the CDLTest360 Learning Center — every topic in your state CDL manual has a matching guide, and each one is written the same way this page is: quick answer first, plain-English explanation second, real-world common mistakes third.